ระบบควบคุมอุปกรณ์ในห้อง สามารถตั้งโปรแกรมได้ 6 ปุ่ม
Back Lit & Label Capable Buttons — 6 RGB–color, tactile feedback, backlit buttons.
Custom Labeled, Removable Button Caps.
1 K–NET™ Connector — Connect to master room controller, and auxiliary keypads for remote keypad control.
K–NET™ Single Link Connection — Provides a single keypad link cable–connectivity, carrying both power and keypad control communication information.
1 RS–485 Bi–directional Control Port — Control devices via RS–485 control protocols.
2 RS–232 Bi–directional Control Ports — Control a device via bi–directional serial control protocols.
2 IR Emitter Control Ports — Control a device via IR control protocols.
1 GPI/O Control Port — Controls a device via general purpose I/O ports, program–configured as digital input, digital output or analog input interface for controlling sensors, door–locks, audio volume and light dim level, or lighting control devices.
2 Relay Control Ports — Control a device via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.
IR Sensor Port — Learns commands from IR remotes.
Program Control — Program configuration with Kramer K–Config software.
Kramer Site–CTRL™ Compatibility — For network management and remote control over the Ethernet port.
Keypad Lock–Out — Option for tampering prevention by locking and unlocking of the keypad buttons.
Mini USB Port — To upload configuration files, set the K–NET™ ID number, and power the device during configuration.
Mounting — In–wall, in standard 1 gang US junction box size.
Easy Installation — Fits standard in–wall boxes for simple and cost–reducing installation.
1 RS–485, 2 RS–232, 1 GPI/O, 1 K–NET on terminal block connectors, 1 Ethernet on an RJ–45 connector, 1 infrared sensor, 1 mini USB for programming
2 IR emitter, 2 relays (36V AC or DC, 2A, 60V AC maximum on non–inductive load) on terminal block connectors
DEFAULT IP SETTINGS
IP number — 192.168.1.39
Mask — 255.255.0.0
Gateway — 0.0.0.0
12V DC, 570mA
0° to +40°C (32° to 104°F)
–40° to +70°C (–40° to 158°F)
10% to 90%, RHL non–condensing
Power supply, black and white DECORA® design frames, black and white mounting plates, label set (label size: 8.8mm x 8.8mm), screwdriver
7.94cm x 2.80cm x 12.38cm (3.13" x 1.10" x 4.87" ) W, D, H
0.1kg (0.2lbs) approx
23.20cm x 13.60cm x 10.00cm (9.13" x 5.35" x 3.94" ) W, D, H
0.4kg (0.8lbs) approx